How to Make a Tattoo Gun With an Electric Toothbrush - good electric toothbrush

Tattoos are usually done by tattoo artists in a professional setting, which is undoubtedly the safest way to get a tattoo.
However, tattoo art has been practiced by non professionals for thousands of years, using only sharp objects, ink made from ashes and water.
You probably shouldn't be trying to get a tattoo yourself, but if you want a tattoo and you want more than just a rough one, you'll want to make or get a tattoo gun with a motor in the first place.
One way to make a tattoo gun with a motor is to make a tattoo gun with an electric toothbrush.
Remember again, it is not recommended that you tattoo yourself with this or any other
Tattoo method.
Remove the braces from the electric toothbrush.
The toothbrush will no longer have a brushing device and long metal bars should be exposed.
Use your hand to break the eraser at the end of the pencil. Poke an 11-or 12-
Measure guitar strings by Eraser.
Remove the plastic case at the top from the mechanical pencil.
Send the top of the guitar string through the shell and eraser.
When the guitar string sticks out about 2 inch from the mechanical shell, to 90-
Angle by hand or with a hard surface.
The bottom of the guitar string remains unbent.
Place the guitar string and eraser device on the metal rod of the electric toothbrush.
Fix everything in place with tape.
Cutting the tip of the guitar string with a 45-wire cutting machine
This angle is very sharp.
The sharper the rope, the easier it will be to use your tattoo gun.
Disinfect the guitar strings before use.
Don't use tattoo guns twice, especially on two different people.
Before getting a tattoo, you may want to practice on the skin of fruits like bananas or oranges.