DIY Girl Pirate Costume HOW-TO - dental floss water jet

First take an old leather pants and tear the seams inside.
Then buckle the zipper and top belt of the pants.
Put the pants flat on the table and nail the trousers neatly together.
Measure the size of your head and draw a cut circle on a piece of waste paper.
Then trace the circle to the nailed leather pants, so that the center of the circle is on the nailed seam.
Measure 1 feet from the center of the circle and draw the second circle.
Don't worry if it's not perfect, you'll cut it down later anyway.
Next, the large circle is cut using a rotary cutter, and then the small circle is cut to form the shape of the doughnut.
Sew a fixed seam in the shape of a doughnut with your floss and leather needle.
Place the shape of the doughnut around the bowl and put it on one side.
Cut a strap from the leather on the left and your head is about 2 1/2 wide.
Then, sew the two ends together to form a ring.
Then sew the small circle that you have already cut from the shape of the doughnut, with floss along the fixed seam (
In this project, dental floss and leather needles are always used because dental floss is wax and strong and the leather needles are sharp).
Next, sew the ring on a small circle, create a top for the hat, and create a space for your head.
Then place the headdress on the top of the bowl, which is surrounded by the shape of the doughnut, and sew the two parts together.
Use a rotary cutter to cut the shape of the doughnut while it is still on the bowl (
It makes style easier).
I cut it in halftriangular-butterfly-
Shape ,(
View pictures)
Because it makes it easier for me to create the three sides shape I want for my hat.
Next, I began to shape it.
Roll up your back first (
Or the flat end of the "butterfly" shape)
Nail it on the headdress.
Second, pin the two sides on the headdress so that the hat looks like a triangle from it.
When you have nailed the three sides, there is a lot of extra leather behind the hat, so nail the areas as well.
I messed up a lot on the styling of the hat and spent a lot of time fixing and testing things that looked good.
Look at the video and you will see what I mean.
Once your hat is perfect, sew up the place you nailed.
You have a perfect pirate hat!
With the rest of the leather, place it in the middle and mark your size with some pins.
Don't poke yourself!
The bodice should be right under the chest and above the hips.
Next, cut off the remaining leather according to your size.
Next, in the case of a total of 8 holes, four slit appears to be cut along each parallel.
Then cut a long ribbon (
Don't be stingy, you can cut off the extra stuff at the end).
I used a thick black ribbon but you can use any color.
I just think the thickness of the ribbon makes the bodice stronger.
If you use a cheap thin ribbon, it will tear or stretch if you tie too tightly, and the corset will not stay on it.
Then put the ribbon through the corset.
First pass the ribbon through the first hole on either side of the corset from the inside, then evenly cross the ribbon across the sides.
Then cross the straps together and pass through the outside of the next two holes.
Next, cross the center from the inside, through the ribbon, and then through the ribbon from the outside.
Continue with the remaining slit.
Once you touch the bottom, tie a bow.
Only when there are a lot of ribbons will Extra ribbons be cut because you will need some extra ribbons to re-weave your bodice if you need them.
Then you have the best bodice in town!
First, put your button shirt on your body.
Then draw a line around the shoulder at the top of the shirt.
This is the new "off" you're going-the-
The shoulder neckline of your fluffy shirt.
Remove the shirt from the body shape and cut the top of the shirt along this line.
Next, cut the bottom of the sleeve in about three positionsquarter length.
Then fold the top edge of the shirt about 2 inch and make a shell with a pin.
Sew along the needle line with your sewing machine.
Next, cut two slit in the middle of the sleeve of the two shoulders, a total of four holes.
Take another long ribbon (
I used the same ribbon as the bodice, but you don't have)
And put a safety pin on its end.
Use the safety pin to pass the ribbon from the front hole of one shoulder through the shell and through the front hole of the other shoulder.
Then go through the other strap in the two holes in the back.
Put the shirt back on the body and tie the ribbon on each shoulder to a beautiful bow.
Then sew the sleeve inside and make it shorter
First nail up the sleeves and then set up the shirt with a sewing machine.
Don't worry about making it perfect, you want to make it simple.
Complete your perfect pirate costume with a pair of knees
High leather boots, a fish-
Some casual, flashy pirate jewelry and, of course, headscarves.
This is a great dress and you can buy a lot less money than in a clothing store.
Totally unique!
I would love to see your explanation for this project! Have fun! Argggg!