a guy\'s guide to dusting

I\'m building a family workshop in the basement.
My first project is to build a workbench. (
Create a real woodworking workbench)
Many carpenters now have sophisticated dust collection systems.
I have a vac store
I have been doing everything I can, using dust collecting ports on all the devices that have it, vacuuming sawdust from various surfaces such as floors and saws, Sanders, routers, etc. Throw it away.
But still, my possql is complaining about dust, and the problem is that after a few hours of it being created, very good dust appears on the surface away from the source.
She insisted on doing something, so one afternoon when she went out, I decided to clean it up.
Of course, I\'m a man. A tool user.
I don\'t want to solve this problem with a feather duster.
Of course, tape should be used for each solution.
I took an industrial blower I lay down, a carton, some tape, a cutter, and two furnace filters and built an air washer.
One is the highest
Quality filters on their shelves.
The other one is the cheapest.
The good price is over $15 and the cheap price is $0. 56.
I hope the cheap filter will catch some larger particles so that the expensive one will last longer.
I\'m not sure this is the case as most of the larger particles have been cleaned up by the vac store. Still, at $0.
56 pieces, I can experiment with them.
I opened a hole at the bottom of the box, which was mounted on the inlet of the blower, and then cut the flap at the top of the box to install the filter. Then I duct-
Tie the blower to the box, pipe-
Stick the two filters together and tape them-
Stick the filter to the box.
Total construction Time: 7 minutes.
Open the blower.
Plug the hose in the store
The vacuum cleaner enters the exhaust so that the air blows out of the wand.
Then go to town and blow all the dust into the air.
In a room free of dust, it takes little time to blow every surface.
Of course, most of the dust will get stuck with the stove filter.
The blower capacity I am using is 300 cubic feet/min.
The basement air can be completely exchanged in about 20 minutes.
After about 10 minutes I moved the blower to another location and did it again.
It turns out to be a very effective labor.
Saving method of dust removal.
Watch out for vac in the store.
It creates a strong flow of air.
Enough to move larger and heavier objects than you think.
I found myself picking up more than one object from the floor and putting it back where it was.
Fortunately, there is nothing fragile.
This weekend, I may be cleaning the living room when she goes out again.